Stone Adhesives

We Super Construction Chemicals are a coveted Manufacturers, Suppliers, Providers, Dealers, Traders, Wholesalers, Authorized Distributors of Stone Adhesives. Stone Adhesive hardens (cure) in minutes and creates an Extra Strong Bond. It works best as an adhesive for natural stone surfaces including marble, granite, and slate. SCA is non-toxic and suitable for use in kitchens. SCA is a Self Cure Acrylic that does not yellow over time and is not epoxy.

Stone adhesives are specialized bonding materials used for installing and bonding natural stone materials, such as marble, granite, limestone, slate, and other types of stone. These adhesives are designed to provide strong adhesion, durability, and stability to ensure that the stone remains securely attached to the desired surface. Epoxy-based adhesives offer high bonding strength, excellent resistance to moisture, chemicals, and temperature variations. They are commonly used for bonding heavy or large stone pieces and are suitable for both indoor and outdoor applications. Polyester-based adhesives are often used for vertical stone applications, such as wall cladding. They offer good bonding strength and are available in different colors to match the stone. Polyurethane-based adhesives provide good bonding strength and flexibility. They are suitable for a wide range of stone types and can be used on different substrates. Stone adhesives are designed to have strong adhesion to natural stone surfaces and various substrates, such as concrete, masonry, or metal. They often exhibit high bond strength, resistance to water, chemicals, and temperature fluctuations. Some stone adhesives may also offer specific properties like non-sag or rapid curing. Proper surface preparation is crucial for a successful stone installation. The surfaces should be clean, free from dust, oil, or any other contaminants that may hinder the adhesive's bonding ability. Depending on the specific adhesive, the stone and substrate may need to be properly primed or roughened to enhance adhesion. Stone adhesives are typically applied using a trowel or a suitable adhesive applicator. The adhesive is applied to both the stone and substrate surfaces, and the stone pieces are then firmly pressed into place. The curing time varies depending on the adhesive type and manufacturer's instructions. After the stone adhesive has cured, grouting is often done to fill the gaps between the stone pieces. Grouting materials, such as epoxy or cement-based grouts, can be used to provide a finished and uniform appearance. The size of the area to which the adhesive will be applied is determined by the adhesive being used and the size of the area to which the adhesive will be applied. One or both of the items to be joined are coated with adhesive. The components are aligned, and pressure is applied to promote adhesion and remove air bubbles from the bond. We supply our superior quality Stone Adhesives to our valuable clients In Mumbai, In Navi Mumbai, In Thane.